Sany SY265 Hydraulic Final Drive Motor

F:105 mm; Mass inner ring:0.43 kg; r, r1,2 min.:1 mm; d:95 mm; B:36 mm;

P120°:11.1 kN; P60°:28.9 kN; J max.:177.8 mm; P90°:17.3 kN; Mass pillow block:6.19 kg; Cap bolt:2 x 7/16-14 UNC; A2:165.1 mm; Taconite seal:TER 20; End plug (suffix Y):EPR 4; Stabilizing ring:SR-10-0;

Db min.:125 mm; Basic static load rating C0:228 kN; D:130 mm; Dimension series:M 716600; Calculation factor e:0.44; Fatigue load limit Pu:26 kN; Basic dynamic load rating C:172 kN; Calculation factor Y0:0.8; r1,2 min.:3 mm; rb max.:2.5 mm;

Minimum load factor A:0.026; H1:46 mm; Limiting speed:3800 r/min; Reference speed:2800 r/min; Basic static load rating C0:65.5 kN; Mass bearing (including seat washer where applicable):0.58 kg; da:30 mm; ra max.:1 mm; D3:62 mm; Fatigue load limit Pu:2.4 kN;

ALPHA_:0; DI_:49.5; dc min:52; Macha rpm:11000; C:55.5; hidYobi:NUP208EM; B_:18; yobi:NUP208EM; D_:80; D_a max:73.5;

PG:1/4 NPT; Eye bolt:3/8-16 UNC; Initial grease fill:382.73 g; Cap bolt recommended tightening torque:400 N·m; R1:79.375 mm; J min.:371.475 mm; Cap bolt:2 x 1-8 UNC; Appropriate attachment bolt size G:0.875 in; Ca:73.787 mm; P180°:84.5 kN;

D_:22; C:3.3; C0:1.37; DA_:3.969; d:6; B1:7; Prod_Type3:ESM_MD_DD; LangID:1; KBRG:619; B_:7;