Bomag BW164 Reman Hydraulic Final Drive Motor

d:160 mm; Basic dynamic load rating C:649 kN; Basic static load rating C0:980 kN; B:59 mm; Dimension series:4EE; T:61 mm; D:245 mm; ra max.:6 mm; Mass bearing:10.3 kg; Reference speed:2000 r/min;

Sealed Speed Rating n3:20000 rpm; Basic Static Radial Load Rating Co:1960 N; d:9.000 mm; B:8.00 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:28000 rpm; Oil Speed Rating Open/Shielded n2:34000 rpm; Basic Dynamic Radial Load Rating C:4620 N; D:26.0000 mm; Fillet Radius ra:

r3,4 min.:2.1 mm; d:65 mm; B1:10 mm; d1 ≈:90.65 mm; Mass angle ring:0.3 kg; B2:18 mm;

Grease Speed Rating n1:1300 rpm; B:72.00 mm; d:240.000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:830000 N; Basic Dynamic Radial Load Rating C:540000 N; Oil Speed Rating n2:1600 rpm; Fillet Radius rb:1.00 mm; D:440.0000 mm;

H1:76.2 mm; db:60.325 mm; Bearing:1310 ETN9; Ca:50.8 mm; da:50 mm; J min.:196.85 mm; Stabilizing ring:2 x SR-1610; Cap bolt:2 x 1/2-13 UNC; R1:42.862 mm; P60°:39.1 kN;

Mass housing washer:1.11 kg; r1,2 min.:1.5 mm; B:14 mm; D:130 mm; D1:62 mm;

Pu:1.230 kN; Weight:0.19 kg; d:36 mm; Oil:0 min-1; Dynamic (Cr):24.1 kN; D:62 mm; B:16 mm; Static (Cor):27.1 kN; Grease:4 410 min-1; Bearing designation:PLC 14-29  ;

Dynamic (Cr):7.5 mm; Grease:1380 kN; B:93 mm; with cylindrical bore:1 300 min-1; D:280 mm; rs (min):4 mm; Static (Cor):13.9 mm; d:130 mm; Oil:135.690 kN; with tapered bore:1 700 min-1;

J1:53.975 mm; Bearing:1218; Taconite seal (db shaft position):TER 112; R2:27.781 mm; R1:60.325 mm; Cap bolt recommended tightening torque:149.1 N·m; P120°:38.3 kN; Cap bolt:2 x 5/8-11 UNC; Stabilizing ring:2 x SR-1518; db:104.775 mm;

s:1.5 mm; F:84 mm; b1:17 mm; b:10 mm; Pu:15.490 kN; r1s (min):2.1 mm; d2:65 mm; D:140 mm; Dynamic (Ca):131 kN; Static (Coa):128 kN;

Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:8500 rpm; d:35.000 mm; D:80.0000 mm; Basic Static Radial Load Rating Co:28500 N; B:21.00 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:39300 N; Grease Speed Rating Open/Shielded n1:7000 rpm;

D:150 mm; Pu:3.079 kN; rs:2.1 mm; da:73 min; Oil:5 600 min-1; Weight:2.76 kg; Grease:4 700 min-1; B:35 mm; Static (Cor):69.400 kN; Bearing designation:6412  ;

B:28 mm; Limiting speed:4800 r/min; D2 ≈:165.3 mm; Basic dynamic load rating C:88.4 kN; r1,2 min.:2 mm; Basic static load rating C0:80 kN; D3:173.66 mm; D:180 mm; ra max.:2 mm; Fatigue load limit Pu:2.75 kN;

Specific dynamic load factor K:100 N/mm²; d:40 mm; l1 min.:76 mm; dk:53 mm; Material constant KM:330; l2 max.:194 mm; h:145 mm; Mass rod end:1.9 kg; l7 min.:46 mm; α:6 °;

Oil Speed Rating Open/Shielded n2:1400 rpm; Basic Dynamic Radial Load Rating C:371000 N; D:480.0000 mm; Basic Static Radial Load Rating Co:540000 N; Fillet Radius ra:3.00 mm; Grease Speed Rating Open/Shielded n1:1100 rpm; B:74.00 mm; Accessories:Two Shields; d:320.000 mm; Sealed Speed Rating n3:730