Bobcat 331 Aftermarket Final Drive And Travel Motor

Characteristic outer ring frequency, BPF0:6.57 Hz; C:28 mm; Weight / Kilogram:2.5; D:140 mm; T:36 mm; Category:Bearings; db min:79 mm; Inventory:0.0; Manufacturer Name:NTN; r1s min:2.5 mm;

D:190.0000 mm; Basic Static Radial Load Rating Co:166000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4300 rpm; B:45.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:168000 N; d:75.000 mm; Grease Speed Rating n1:3600 rpm;

H:30.2 mm; S:6 mm; H2:57 mm; T min.:-40 °C; L1:17.5 mm; J:47 mm; T max.:100 °C; A1:18 mm; Designation of bearing:US202G2T04; d:15 mm;

Oil Lubrication - M/N Seal:1800 rpm; Pre Install Clearance Max:0.0026 in; Dimension M:2.15 in; Dimension RA:0.12 in; C0 - Static Load:48600 lb; Engineering Group:Mounted Bearing; Grease Lubrication - T Seal:2800 rpm; Grease Lubrication - B/C/O Seal:1500 rpm; Full Timken Part Number:QAC13A207SB; Dime

Nlim:7,600 rpm; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; Brand:SNR; B:20 mm; Static load, C0:33.6 kN; d1:83.5 mm; rs min:1.1 mm; da min:81.5 mm; d:75 mm;

Ca - Axial Load Rating:2383 lbf; Series Type:Medium Series; Dimension H:1.6 in; Note:This product line wa; Bearing Type:Split Cylindrical Re; Tensioning Unit Type:Tension Type; Dimension R:1.4 in; Bearing - Housing - Seal:MSE211BRHKPS; Bearing Number:MSE211BR; Dimension X:1.2 in;

Threads No. per Inch:8; Weight:7.75 lb; E:8.781 in; G:0.735 in; D:1.135 in; H:0.323 in; Major Diameter d:7.472 in; C:9.474 in;

J:64 mm; T min.:-20 °C; s1:15.5 mm; e:15 mm; A2:33.3 mm; Designation of housing:F204-; S:12.7 mm; Weight:0.57 kg; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm;

Bearing Number:LSM240BX; Maximum Speed:820 rpm; Series Type:Light Series; Bolt Size:4 x M36; Bearing UPC:013992029270; Support Type:Four-Bolt Plummer Bl; Dimension M:280 mm; Dimension H:260 mm; Dimension K:160 mm; Housing Width:7.4 in;

Dimension J2 :9-7/8 in; Dimension M :3-1/2 in; Series Type:Light Series; Bearing Number:LSE215BX; Support Type:Two-Bolt Plummer Blo; Bearing Type:Split Cylindrical Ex; Seal Type:High Temperature Pac; Bolt Size:2 x 3/4; Note:This product line wa; Shaft Size:2-15/16 in;

Ca - Axial Load Rating:6609.30 lbf; Dimension B:10.5 in; Dimension N:18.3 in; Dimension H:2.2 in; Cor - Static Load Rating:149273 lbf; Bearing UPC:013992028754; Dimension A:11.0 in; Tensioning Unit Type:Tension Type; Dimension S:3.4 in; Maximum Speed:1450 rpm;

T max.:100 °C; d:75 mm; Designation of bearing:UC215G2; A1:20 mm; s1:38.9 mm; C:66 kN; J:153 mm; N:23mm; Weight:6.31 kg; Recommended tightening torque for set screw:33 Nm;

J:50.8 mm; s1:30.5 mm; Z:62.9 mm; d:15 mm; H2:64 mm; T max.:100 °C; Designation of open end cover:SCOE204-15; d1:32.4 mm; E:10 mm; H:33.3 mm;

UNSPSC:31171504; Noun:Bearing; Outside Diameter:4.331 Inch | 110 Mil; Manufacturer Item Number:6212L1AC3; Bore:2.362 Inch | 60 Mill; Inner Race Width:0 Inch | 0 Millimete; Characteristic outer ring frequency, BPF0:4.08 Hz; da min:68 mm; Inventory:0.0; Min operating temperature, Tmin:-60 °C;

Designation of open end cover:SCOU206-18; H1:13 mm; T min.:-20 °C; Weight:1.02 kg; A:48 mm; s1:15 mm; A1:25 mm; Dz:70 mm; N:M14; L1:30 mm;